Measure Missing Line (Models 360/B/R):
Position yourself anywhere you have a clear line of
site to your two targets.
Measure Missing Line (Models 200/B):
Follow the same steps above. You need to position
yourself where shot 1 and 2 are made looking in
the same direction with a clear line of site to both
targets. The exception is the VD solution will
always be accurate no matter which direction shot
1 and 2 are taken.
[1] Press until ( ) and ( ) ashes.
[2] Aim at the 1st target, press-and-hold ( ).
[3] ( ) Aim at 2nd target, press-and-hold ( ).
[4] ( ), keep pressing to scroll through
( ) from shot 1 to shot 2.
To Previous Page
Loading...
Need help?
General
