Laser Technology TruPulse 200 - Unpacking Your TruPulse; Understanding TruPulse Operation; LCD Display Overview; Laser Range Sensor Function

[1] Always recalibrate your compass when ( ) ashes.
[2] If calibration fails repeatedly, perform the tilt calibration then repeat steps.
Calibrate the Compass (Models 360/B/R):
Always perform outside, away from magnetic interference
and face towards Magnetic North.
Helpful Tips:
[1] Press-and-hold ( ), press until ( )
[2] Press ( ), press ( ), press .
[3] ( )( ), press ( )( ), press .
[4] Face North ( ), hold in position 1, press ( ).
[5] Hold in position 2, press ( ), hold in position 3.
[6] Press ( ), hold in position 4, press ( ).
[7] Hold in position 5, press ( ), hold in position 6.
[8] Press ( ), hold in position 7, press ( ).
[9] Hold in position 8, press . If ( ), press and
repeat steps 4 through 8. If ( ), press ( ).
[2]
[5][1]
[3]
[8]
[7]
[6]
[4]