Reject
When there is an incoming call, press and hold the left/right earbud
to reject the call.
Activate the voice assistant
Press and hold the left/right earbud for 2 seconds to activate voice
assistant.
Press and hold for 2 seconds to quit the voice assistant.
Bluetooth
Pairing
1. Turn on the earbuds.
2. Remove the earbuds from the box and wait for a few seconds until
the two earbuds pair up (right LED flashes).
3. Once paired, enable Bluetooth on your connecting device. It will
search for nearby Bluetooth devices.
4. Select “AO-EVDBL-T”.
If “AO-EVDBL-T” does not appear on your connecting device’s
screen, try again from the beginning of step 1.
5. Now, audio you play on your connected device should come
through the earbuds.
Disconnecting/Unpairing:
1. To disconnect, turn off your connected device’s Bluetooth or the
earbuds.
EARBUDS
8
To Next Page
Loading...
