EARBUDS
Controls and Ports
Charging
ⓘ Fully charge the case and the earbuds before first use.
ⓘ Recharge the earbuds while the case is closed.
ⓘ Disconnect the cable when fully charged.
Use the supplied cable. Connect the USB-C jack to the case.
Connect the other end to a USB power source.
A USB power adaptor (5V 1A, not included) is recommended for
charging, or a PC/laptop USB port can be used.
When charging, the LEDs on the case and earbuds will flash; they
will turn off when charging is done.
Earbuds
indicator light
Tap area
USB-C
Charging Port
Case indicator
light
6
To Next Page
Loading...
