Audio
O
utput
S/PDIF
(Sony/Philips
Digital
Interface
Format)
Bit stream: the digital audio signal will
output in the original format.
Select when
connected device can decode.
PCM: Select “PCM” when the connected
device can’t decode. When this option is
selected, output pulse code modulation
(PCM)
Re-encode: Recode PCM to DTS bitstream
format
OFF: Turn S/PDIF output off
HDMI
(High-
Definition
Multimedia
Interface)
Bit stream: Bit stream Format
PCM AUTO: Multi-Channel Linear PCM
format (Auto detect)
PCM 7.x: 7.1
PCM 5.x: 5.1
PCM 2.x: 2.1
Re-encode: Recode PCM to DTS bitstream
format
OFF: Turn HDMI output off
Down
Sampling
(select the
down-
sampling
frequency of
digital audio
signal PCM
code)
If the input audio is higher than 48KHZ, the
original audio will be down-sampled to
48KHZ or lower.
96K
If the input audio is higher than 96KHZ, the
original audio will be down-sampled to
96KHZ or lower.
192K
If the input audio is higher than 192KHZ,
the original audio will be down-sampled to
192KHZ or lower.
Dolby DRC
(Dolby
Dynamic
Range
Compression)
ON (enable dynamic output compression
OFF (disable dynamic output compression)
Auto
Dynamic range is the difference between
the minimum audio strength higher than
device noise and the maximum audio
strength before distortion.
To Next Page
Loading...
Need help?
General
