SPK-BT206 USER MANUAL
5
GETTING STARTED
CONNECTING THE SPEAKER
Connecting the Speaker
Pairing the Speaker
1) Press and hold the power button on the rear of the speaker for 3 to 4 seconds until a
tone is heard from the speaker. This indicates the speaker is now turned on.
2) Press and hold the Pairing key for 2 seconds until a short tone is heard and the
pairing key starts flashing rapidly blue.
3) Turn on a compatible device and connect to the SPK-BT260 through the devices
Bluetooth menu as described in the devices user manual.
Reconnecting
Once the speaker has been paired to a device, it is paired to that device until it is paired to
another.
To reconnect to a paired device, ensure the Bluetooth feature on the device is on and turn
the speaker on. The device should automatically connect to the speaker.
Audio Playback
1) Select an audio track to play as normal on your device and press play on the devices
app or software.
2) Volume and playback can be controlled on the device as per normal.
Speaker Controls
Pause/Play
Playback can be paused by tapping the Play/Pause button on the front of the speaker. Press
again to resume playback.
Volume Control
Volume can be adjusted be tapping the Volume Up Button (+) or Volume Down Button (-) on
the front of the speaker. The speaker will speak the phrase “Volume down” when the
Volume Down Button (-) is pressed speak the phrase “Volume up” when the Volume UP
Button (+) is pressed. The phrase “Maximum” will be spoken when the volume is up as far as
it will go.
To Next Page
Loading...
Need help?
General
