QUICK USER MANUAL SPK-WFQ10
6
Apple Users
1) Connecting your Device to the Speaker
Turn on the speaker and make sure it is in pairing mode. Using your mobile phone or tablet turn on your
Wi-Fi and view the available Wi-Fi networks. You will then see the speaker (LASER-WFQ10) in the list.
Please select it and press CONNECT.
Please note: You will need to wait about 1 minute before the Wi-Fi speaker appears. The speaker will have
6 characters after the model number. This is the speakers’ unique MAC (hardware) address
Please note: If you are unsure you are in pairing mode, press and hold the SET button on the back of the
speaker for 5 seconds. This will reset the unit back to factory settings.
To Next Page
Loading...
Need help?
General
