LaserLiner MultiMeter Pocket XP - Function and Application

MultiMeter Pocket XP
17
Completely read through the operating instructions, the
"Warranty and Additional Information" booklet as well as
the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
This document must be kept in a safe place and passed
on together with the device.
!
Function/Application
Multimeter for taking measurements in the range of the overvoltage
category CAT III up to max. 600 V/CAT IV up to max 600 V. The meter
can be used to measure DC and AC voltages, direct and alternating
currents, resistances, capacitances, frequencies and duty factors
within the specied ranges; it can also be used for continuity and
diode testing.
Symbols
Danger area warning
Hazardous electrical voltage warning: Unprotected live
components inside the devicehousing may pose a risk of
electric shock.
Protection class II: The test device has reinforced
or double insulation.
Overvoltage category III: Equipment in xed installations
and for applications where specic requirements with
regard to the reliability and availability of equipment
have to be met, e.g. circuit-breakers in xed installations
and devices used in industrial applications which are
permanently connected to the xed installation.
Overvoltage category II: Single-phase consumers that are
connected to standard sockets, e.g. household appliances,
portable tools.
Overvoltage category IV: Devices such as electricity
meters, overcurrent circuit breakers and ripple-control
units, which are intended for use at or near the infeed
into the electrical installation of buildings, and
specically from the main distribution to the supply
system.
EN