29
Data transfer
Application (app)
The device features a Bluetooth
®
* function that enables wireless
data transfer to mobile devices with a Bluetooth
®
* interface
(such as a smartphone or tablet).
The system prerequisites for a Bluetooth
®
* connection are specied
at http://laserliner.com/info?an=ble
The device can set up a Bluetooth
®
* connection with Bluetooth 4.0
compatible devices.
The range is set to a maximum distance of 10 m from the terminal
device and greatly depends on the ambient conditions such as the
thickness and composition of walls, sources of interference as well
as the transmit / receive properties of the terminal device.
Bluetooth
®
* must be activated after switching on the device as
the measuring system or measuring device is designed for very low
power consumption.
A mobile device can link up to the active measuring device via an app.
An app is required to use the Bluetooth
®
* function. You can
download the app from the corresponding stores for the specific
type of terminal device:
After starting the app and activating the Bluetooth
®
* function,
a connection can be set up between a mobile device and the
measuring device. If the app detects several active measuring devices,
select the matching device.
This measuring device can be connected automatically the next
time it is switched on.
* The Bluetooth
®
word mark and the logo are registered trademarks of Bluetooth SIG Inc.
Make sure that the Bluetooth
®
* interface of the mobile
device is activated.
!
Calibration
The meter needs to be calibrated and tested on a regular basis to
ensure it produces accurate measurement results. We recommend
carrying out calibration once a year.
EN
To Next Page
Loading...
