22
1.
2.
Function Maximum limit values
Max. input voltage between the
respective input terminals and earth:
V AC, V DC 10 MΩ input impedance
V AC, V DC, frequency, duty cycle 600 V rms
Resistance, continuity, capacitance,
diode test
250 V rms
Max. input current and fuse protection in current measurement:
10A AC/DC
Fast-acting fuse 10 A / 600 V
rms (on-time max. 30 sec. every
15 min.)
μA AC/DC, mA AC/DC
Fast-acting fuse
500 mA / 600 V rms
Maximum limit values
AUTO OFF function
In order to preserve the batteries, the meter switches off auto-
matically if it is left idle for 15 minutes. To protect the function
the Mode button is held pressed during switch-on.
Insertion of batteries
1
Attaching the test prods
2
To avoid the risk of injury, the test
prods must always be kept in the
holder at the rear of the device with
the protective caps tted when not
in use and during transportation.
EN
To Next Page
Loading...
