Lauda IN 1030 T User Manual

Integral Process Thermostats and High-Temperature Thermostats
Operation manual
IN 130 T, IN 230 T, IN 230 TW, IN 530 T, IN 530 TW, IN 1030 T, IN 1330 TW, IN 1830 TW, IN 150 XT,
IN 250 XTW, IN 280 XT, IN 280 XTW, IN 550 XT, IN 550 XTW, IN 590 XTW, IN 750 XT, IN 950 XTW, IN 1590 XTW,
IN 1850 XTW, IN 2560 XTW, IN 2050 PW, IN 2560 PW, IN 4 XTW, IN 8 XTW
V6R9
Read this manual prior to performing any task!

Lauda IN 1030 T Specifications

General

Brand	Lauda
Model	IN 1030 T
Category	Thermostat
Language	English

Summary

Safety

Safety information

General safety guidelines and important information for safe device operation.

Obligations of the operator

Details the responsibilities of the operator for safe system installation and compliance.

Personal protective equipment

Lists essential personal protective equipment (gloves, clothing, glasses) for safe operation.

Safety fittings on the device

Describes safety features like overtemperature and low-level protection, and their functions.

Unpacking

Unpacking

Step-by-step instructions for safely unpacking the device and checking for completeness and damage.

Device description

Hydraulic circuit

Explains the hydraulic circuit design for Integral T and Integral XT devices.

Interfaces

Details the available standard and accessory interface modules for device connectivity.

Before starting up

Install device

Provides instructions and warnings for installing the device correctly and safely.

Hoses

Details hose requirements, selection, and connection for the hydraulic circuit.

Connecting an external application

Guides on connecting external applications and associated warnings for safe operation.

LAUDA heat transfer liquids

Lists permissible heat transfer liquids, their properties, and usage recommendations.

Cooling water requirements

Specifies the required quality and purity standards for cooling water.

Connecting the cooling water

Details the connection procedure and specifications for water-cooled devices.

Configuring interfaces

Explains how to configure the device's interface modules for communication.

Configuring the Ethernet interface

Provides steps for configuring the Ethernet interface for PC control and network connectivity.

Error messages

Commissioning

Establishing a mains connection

Provides instructions for safely connecting the device to the mains power supply.

Switching on the device for the first time

Details the initial power-on sequence and required settings for first-time device use.

Operating the device with the operating unit

Explains how to navigate and operate the device using its built-in operating unit.

Home window, navigation and softkeys

Enter entry window and set temperature

Setting heat transfer liquid

Guides on selecting and setting the heat transfer liquid used in the device.

Fill the device with heat transfer liquid

Provides instructions and warnings for safely filling the device with heat transfer liquid.

Degas heat transfer liquid (low boiling point expulsion)

Explains the process of degassing heat transfer liquid to remove low boilers.

Setting the flow rate of the heat transfer liquid

Control parameters

Control basics

Overview of internal control parameters

Overview of external control parameters

Operation

General warning

Lists general warnings and safety precautions related to handling hot liquids and device operation.

Operating modes

Setting Tmax

Guides on setting the maximum temperature (Tmax) for safety and device protection.

Self adaptation

Limiting heating and cooling

Cooling

Setting temperature limits Tih and Til

Basic settings

Calibrating the temperature probe

Provides instructions for calibrating the temperature probe using offset or 2-point calibration.

Restore the factory setting

Viewing the Device status

Programmer

Set and process program

Operator and viewer

Web server LAUDA Command

Describes accessing the device via a web browser or the LAUDA Command app for remote control.

Cloud service LAUDA.LIVE

Safe Mode safety fittings

Details the Safe Mode function for defining an emergency operating mode during faults.

Operating a device with pressure overlay

Warnings, safety instructions and further information

Lists warnings and safety instructions specific to devices with pressure overlay functionality.

Setting the parameters for a pressure-stable application up to the maximum system pressure

Setting the parameters for a pressure-stable application

Filling and operating a device with pressure overlay

Provides instructions for filling and operating devices equipped with a pressure overlay.

Maintenance

Warning notes for maintenance

Highlights crucial safety warnings and precautions before performing any maintenance tasks.

Maintenance intervals

Cleaning the device

Cleaning the air-cooled condenser

Cleaning cooling water circuit

Checking the overtemperature protection

Guides on checking the overtemperature protection function to ensure device safety.

Checking the low-level protection

Details how to check the low-level protection function to prevent damage and ensure safety.

Check the heat transfer liquid

Faults

Alarms, errors and warnings

Explains how alarms, errors, and warnings are displayed and handled on the device.

Alarms

Lists and describes constant temperature equipment alarms and recommended user actions.

Troubleshooting

Provides a guide to diagnosing and resolving common faults and issues with the process thermostat.

Decommissioning

Information on decommissioning

Drain and clean the device

Details the steps for safely draining and cleaning the device before storage or disposal.

Draining the cooling water circuit

Disposal

Disposing of refrigerant

Device disposal

Disposing of heat transfer liquid and liquids

General

Warranty conditions

Contact LAUDA

Provides contact details and reasons for contacting LAUDA Service for support and inquiries.