Lauda Integral T 2200 - Serial Interface Parameters; Remote Control

Integral T process thermostats
21/01/2019 / YAWE 0026 Starting up 53
7.6.4.1 Serial interface parameters / Remote control
Remote control
 To activate the connected remote control set “ON“. Set
to “OFF“ without FBT.
 Selection whether RS 232 or RS 485 is being set.
 On RS 485 the device address has to be set from 1 to
32.
 On RS 232 the display shows immediately the
selection menu for baud rate. It can be set to 2.4/ 4.8/
9.6/ 19.2.