X-431 Torque User Manual
73
tap “Printing test” to test the printing.
Now you can use the Wi-Fi printer to print!
If the printer is not found, please reset the printer to default factory settings (refer
to Step 2 for details) and check whether the current device and the printer are on
the same LAN.
B. If you have configured the Wi-Fi printer to the LAN:
2. Tap “Connect to Printer”:
a). If the local network remains as it is, tap “Test Print” directly to test the
printing.
b). If the local network changes, you have to reset the Wi-Fi printer.
9.8.4 Orientation
X-431 Torque supports 3 kinds of display mode: Auto, Horizontal and Vertical.
Fig. 9-10
When “Auto” is applied, the system will rotate the contents of the screen when
the handset is rotated.
9.8.5 About
The software version information and disclaimer are included.
9.8.6 Login/Exit from current account
To logout the current user ID, tap “Exit from current account”.
To login the system again, tap “Login”.
To Next Page
Loading...
