Launch Creader Professional 909 User Manual

32
LAUNCH Professional 909 User Manual
an example) to jump to the test function page.
Fig. 5-6
*Note: Dierent vehicle has dierent diagnosc menus.
A. Version Information
This function is used to read the version information of system mode, vehicle
VIN, software and ECU.
B. Read Fault Code
This function displays the detailed information of DTC records retrieved from the
vehicle’s control system.
*Note: Retrieving and using DTCs for troubleshooting vehicle operation is only one
part of an overall diagnostic strategy. Never replace a part based only on the DTC
denion. Each DTC has a set of tesng procedures, instrucons and ow charts that
must be followed to confirm the location of the problem. This information can be
found in the vehicle’s service manual.
In Fig. 5-6, tap “Read DTC”, the screen will display the diagnostic result.
Fig. 5-7

Launch Creader Professional 909 Specifications

General

Brand	Launch
Model	Creader Professional 909
Category	Diagnostic Equipment
Language	English