2. For universal sensors, place the TPMS antenna of the tool alongside the
valve stem, point toward the sensor location, and tap Activate on the
screen.
Notes:
1. For early magnet-activated sensors, place the magnet over the stem and then
place the tool alongside the valve stem.
2. If the TPMS sensor requires tire deflation (of the order of 10PSI), then deflate
the tire and place the tool alongside the stem while tapping Activate on the
screen.
www.diagtools.eu; info@diagtools.eu; Pernavas 43A-9, Riga, Latvia, LV-1009; +37129416069
To Next Page
Loading...
