Launch CRT 511S - OBD II Diagnostic Functions; Reading Vehicle Readiness Status; Retrieving Live Data and Freeze Frames; Fault Code Management

LAUNCH
CRT 511S User Manual
33
Tap OK, the following OBDII function list appears.
6.2.1 Read I/M Readiness
This function checks whether or not the various emissions-related systems
on the vehicle are operating properly, and are ready for Inspection and
Maintenance testing.
It can also be used to check the Monitor Run Status, and to confirm if the
www.diagtools.eu; info@diagtools.eu; Pernavas 43A-9, Riga, Latvia, LV-1009; +37129416069