Launch CRT 511S User Manual

LAUNCH
CRT 511S User Manual
26
2. Tap Read ECU ID. Connect the tool to the vehicle’s DLC port and tap OK to
start reading the sensor IDs and positions for viewing.
3. Tap OK to confirm and then tap the Programming tab to enter.
4. Place a LAUNCH-sensor close to the TPMS antenna of the tool, select the
desired wheel position and tap Copy by OBD.
www.diagtools.eu; info@diagtools.eu; Pernavas 43A-9, Riga, Latvia, LV-1009; +37129416069

Launch CRT 511S Specifications

General

Brand	Launch
Model	CRT 511S
Category	Diagnostic Equipment
Language	English