LAUNCH X-431 V V4.0 User Manual
22
Note: If the VCI is not paired up with the tablet before doing this step, a prompt
message box will appear on the screen. Check all the possible reasons of Bluetooth
connection failure carefully, and then tap OK to enter the following screen.
If the VCI was once used with other devices, you need to cancel the pairing of the VCI
first via either one of the following ways:
• On the Android’s home screen, tap “Settings” -> “Bluetooth” -> Choose the desired
VCI from the Paired list. Tap “ ”, and then tap “FORGET” to unpair it.
• Tap “User Info” -> “VCI Management” -> Tap “Deactivate matching”.
Tap “Scan” to start searching for the VCI and pairing up with it.
2. Once pairing is complete, the tablet starts reading the vehicle VIN.
A. If the VIN can be found from the remote server database, the following
screen will appear:
To Next Page
Loading...
