LAUNCH Android-based Scopebox User’s Manual
No. Descri
ptions
1 Signal display area
2 Horizontal Settings: Controls the time base.
3 Vertical Settings: Controls the amplitude of the displayed signal.
4 Trigger Settings: Controls the start event of the sweep.
5 Channel Selection Button
6 Function Menu
[Auto]: It indicates auto trigger setting. See Chapter 3.3.2.
[Ref]: There are expert reference and base reference
available. Expert reference enables you to recall your customized
expert database, whereas base reference provides automatic
pre-setting function of specialized sensors. See Chapter 3.3.6.
[File]: Provides save snapshot, snapshot manager, waveform
record and waveform replay. See Chapter 3.3.5.
[View]: Calibration and display settings are available. See
Chapter 3.3.3.
[Measure]: Includes signal source measurement, horizontal
measurement, vertical measurement and clear measurement. See
Chapter 3.3.4.
[Settings]: Shows/hides the parameter settings area
including horizontal settings, vertical settings and trigger settings.
/ [Start/Stop]: Starts/stops collecting waveforms.
To Next Page
Loading...
