Launch X431 Scopebox - Page 45

LAUNCH Android-based Scopebox User’s Manual
Fig. 3
-7
Tap < or > to select the desired reference value for time/DIV and volts/DIV. To
show or hide the REF, just check/uncheck the box before On/Off.
<3> Display settings
Tap
and then [Display settings] to enter the setting screen. See Fig. 3-8.
Fig. 3-8
Select “Vectors” or “Dots” to display waveforms as vectors or dots.
Check/uncheck the box before Grid to turn on/off grid display.
3.3.4 Measure
<1> Channel source
Tap
and then [Source], a screen similar to Fig. 3-9 will appear.