LAUNCH Android-based Scopebox User’s Manual
Not
e: If no desired channel is selected, the system will take the current source
as the default channel.
<3> Clear measure
Tap
and then [Clear Measure], the system will clear the measurement
result on screen.
3.3.5 File management
<1> Save snapshot
While viewing sampling data, tap
and then [Save Snapshot] to store the
current screen.
<2> Snapshot manager
While viewing sampling data, tap
and then [Snapshot Manager] to enter.
View, delete and edit operations are supported.
<3> Record waveform
This function is used to record input waveforms that are acquired by the
scopebox at a specific period, and save it as waveform file which can be
recalled in future.
It can be performed only when the scopebox is collecting data in Normal mode.
Tap
, then select [Record] from the pop-up menu to start recording. See
Fig. 3-11.
To Next Page
Loading...
