Launch X431 Scopebox - Page 50

LAUNCH Android-based Scopebox User’s Manual
3.3.6 Expert Reference
<1> Expert Reference
By default, it appears blank. As a matter of fact, Expert reference database is
generated by doing the following:
1. Open and edit a snapshot
;
2. Select “Joint the expert database” (refer to the following illustration), and
then tap
to save the waveform being displayed on the screen as REF.
Fig
.
3-
14
Tap
and then [Expert Reference] to enter, the following operation can be
done:
: To load and recall the selected file.
: To delete the selected file.
: To edit the selected file.
<2> Base Reference
Preset waveforms of some sensors are available for your reference.