EasyManua.ls Logo

LAUNDRY SOLUTION SX205100A - Page 2

LAUNDRY SOLUTION SX205100A
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety Precautions
Installatio
n
Please x the controller to avoid vibrate drops
Please install the controller in the metal or not
inammable board.
Please guarantee electric cabinet temperature among
-10℃~+50℃, adding the ventilating fan when
necessary.
Do not expose in the sunlight, strong airow and mist
Do not expose in corrosive and pollution gas, such as
sulde gas, salt mist.
Wiring
Please conrm the power supply is OFF.
Let the professional worker to wiring
Signal without source input, please do not connect with
power supply,
Please increase the system protection, avoids the
controller invalid and cause dangerous.
Please observe the strong and weak electricity
separation principle.
Please use the conforms to the technical standard wire
Please select the parallel method,
Parameter
According to the machine conguration, set the related
parameter, guarantees the machine running.
Run
After conrming the wiring correctly, then power on.
Guarantee environmental condition and the power
supply voltage is in permit condition, only in this way
can start the machine.
When running, please do not inspect the signal.
When running, please do not change the parameter
setting.
When running, please do not approach the machine.
Maintenan
ce,
inspection
The user has any repair needs, please contact with
manufacturer, do not intend to repair it by yourself.
Please do not pull, twist the power line and
communication line.
Please do not touch the controller device directly.
Others
Please be careful when simulating and adjusting the
controller on the desk.Presence of high voltage could
cause electrical hazard and injury.
Symbol explanation
Please familiarize yourself with the following standard warning symbols. They are
used throughout this manual to alert you the possible hazards. Anyone installing,
operating and servicing this controller must understand these symbols and follow all
the safety rules in this manual.
It will cause the dangerous situation, possibly will cause
the personal injury or death when error using.
It will cause the dangerous situation, possibly will lead to
personal injury or death, property damage and economic
loss when error using.
Responsibility statement