LAVAZZA LB2317 - Page 37

English
8
37
8.2.1 Access to the User Menu
When the machine is "ready for use" the user can access
the user menu by pressing the "OK" button.
The menus should be
PASSWORD-protected.
The PASSWORD will not
be requested if set on the
default value (0000). It
should be changed upon
first use to prevent
unauthorised access. After
this change, the password
must be entered each time
the display shows:
In case you do not enter the
password within 4 seconds
the machine goes back to
the previous screen.
Refer to section "Password Setting" to set the
PASSWORD; this section describes how to set it.
If the PASSWORD is
forgotten, you can reset it
by entering a PUK code.
You have to request the
PUK code to the Lavazza
Technical Service, who will
guide you through the
procedure.
8.2.2 Structure of the User Menu
The main options of the user menu are:
MENU ITEM
CLEAN BREWING UNIT
CLEAN CAPPUCCINATORE
Cappuccinatore Light Clean
Cappuccinatore Complete Clean
Exit
Service Menu
Exit