English
11
82
11 TROUBLESHOOTING
11.1 Warning signals
This chapter describes all the warning messages that the machine may display to the user and the actions that can and/or
must be performed by the user.
Warning Signals How to reset the message
The machine is starting up.
Machine in Stand-by.
Press a button.
Upon start-up, the machine activates a cleaning cycle.
The machine is warming up to brew beverages or dispense hot water.
The machine is performing the rinse cycle.
Wait until the machine has completed the cycle.
The "Intenza" water filter must be replaced with a new one.
The "AquaClean" filter must be replaced with a new one.
The machine is priming the circuit.