English
10
81
The first descaling phase starts. When the solution in the
tank is finished, the machine requests to empty and rinse
the tank with fresh drinking water.
Rinse the water tank thoroughly and fill it with fresh
drinking water up to the MAX level. Press the "OK"
button The following screen is displayed:
Remove and empty the drip tray. After emptying it put the
drip tray back into place. Press the "OK" button
The following screen is displayed:
Check that the Cappuccinatore is correctly positioned.
Press the "OK" button The following screen is displayed:
Place a large container under the dispensing spouts (hot
water, coffee and cappuccino). Press the "OK" button The
following screen is displayed:
Once the operation is complete the following screen is
displayed:
Put the small white filter back into place. Fill the water
tank again up to the MAX level with fresh drinking water.
After performing the descaling cycle, rinse the
Cappuccinatore under running water. Empty the
containers used to collect the liquids during descaling. The
descaling solution must be disposed of according to the
manufacturer's instructions and/or regulations in force in
the country of use. Empty the drip tray and place it back.
To Next Page
Loading...
