LAVAZZA LB2317 - Technical Programming

English
8
46
8.4 Technical Programming
The structure of the programming menu is indicated in
section "Structure of the Programming Menu".
The section "Description of Messages in the Programming
Menu" describes all the items in the programming menu.
8.4.1 Access to the Technical
Menu
Proceed as follows to access programming mode.
• Press the "OK" button to access the user menu.
• Scroll the user menu until you reach the "Service Menu"
option.
• Press the "OK" button
• Scroll the maintenance menu until you reach the "Tech
Menu" option.
• Press the "OK" button
The above mentioned
procedure can only be
used to access the
programming menu when
the machine has reached
operating temperature.
The menus should be
PASSWORD-protected.
After this change, the
password must be entered
each time the display
shows:
The PASSWORD will not
be requested if set on the
default value (0000). It
should be changed upon
first use to prevent
unauthorised access.
In case you do not enter the
password within 4 seconds
the machine goes back to
the previous screen.
Refer to section "Password Setting" to set the
PASSWORD; this section describes how to set it.
If the PASSWORD is
forgotten, you can reset it
by entering a PUK code.
You have to request the
PUK code to the Lavazza
Technical Service, who will
guide you through the
procedure.