LAVAZZA LB2317 - Page 50

English
8
50
MENU ITEM Description
Stop Brewing Out of
Credits
This function allows the user to adjust machine operation when the credits have been
used up.
- OFF:
the user can dispense products even when there are no more credits
- ON:
the user cannot dispense products if there are no more credits.
The products cannot be selected
Press the OK button on the EXIT option to go back to the top level
High Speed Milk
This function allows the user to dispense mixed products (milk and coffee) quicker, by
simultaneously enabling the milk and coffee preparation:
- OFF function not enabled
- ON:
function enabled
Press the OK button on the EXIT option to go back to the top level
Initial/final rinsing
This function allows the user to enable or disable the rinsing cycle when the machine
enters or exits from the stand-by mode.
- OFF function not enabled
- ON:
function enabled
Press the OK button on the EXIT option to go back to the top level
Solubles Rinse
This setting determines whether the brew group rinse cycle - after brewing an instant beverage - is enabled or
not:
- OFF:
function not enabled
- ON:
function enabled
Press the OK button on the EXIT option to go back to the top level
WATER HARDNESS
This function allows you to adjust water hardness:
- LEVEL 1: very soft water
- LEVEL 2: soft water
- LEVEL 3:
hard water
- LEVEL 4:
Very hard water
For more details, see the "Measuring and Adjusting Water Hardness" chapter.
Press the OK button on the EXIT option to go back to the top level
Descale Warning
Through this function you can set the alarm indicating the need of machine descaling.
Damage resulting from failure to descale the machine is not covered by warranty.
- OFF:
function not enabled
- ON:
function enabled
Press the OK button on the EXIT option to go back to the top level