2.2 Shutter Driver
Figure 2.3: Shutter driver for two camera shutters.
Simple and straightforward controls allow the LaVision shutter driver to
be easy to use and configure. The LED indicator reveal shutter status at a
glance.
• Shutter operation exposure determined by external pulse source.
• Key switch on Normal position indicates normally closed shutter op-
eration, i.e. since a TTL HIGH level (=5 V) is provided to the Ext.Trig
port the shutter is closed, if a LOW level (=0 V) is provided to the
Ext.Trig port the shutter is open.
• Exposure determined by external pulse (BNC, TTL).
• Shutter interconnect cable included (Lemo).
• Operates on both 115 AC and 230 AC voltages.
• Size (HWD) 17 cm × 27 cm × 30 cm, weight 4.5 kg.
11
To Next Page
Loading...
