Rev: 05.25.21 Page 14 CCD-0004221
Add Another Vehicle
NOTE: A screen will be displayed for five seconds when accessing this mode. The screen will note: "Power
off all other displays connected to the repeater before learning sensors."
1. Select Add Another Vehicle on the SETTINGS screen (Fig. 34A).
2. Select a class of vehicle (Fig. 35) and the type of vehicle to be set up by choosing one of the pictures
shown on the display (Fig. 36).
3. Determine if a spare tire will be added. Pressing YES will add the spare tire icon to the vehicle
selected (Fig. 37).
4. After pressing YES or NO for a spare tire, the display will automatically change to the Learn All
Sensors mode.
5. Notifications will instruct how to learn internal and external sensors.
6. Continue to the Learn All Sensors section.
Fig. 34
Fig. 35
Fig. 36
Fig. 37
A
To Next Page
Loading...
General