To Next Page

To Previous Page

Rev: 05.25.21 Page 2 CCD-0004221

TABLE OF CONTENTS

Introduction 2

Key System Components 3

Safety 3

Preparation 4

Install Repeater 4

Place Repeater Into Pair Mode 4

Message To Power O Displays 5

Pairing, Conguration 5

Sensor Pairing 5

Sensor Pairing Sequence 7

Learn All Sensors 8

Congure All Thresholds 9

Learn A Sensor 10

Detach Vehicles 11

Reattach Vehicles 12

Delete A Vehicle 13

Add Another Vehicle 14

Replace Sensor 15

Display 16

Operation 17

Troubleshooting 18

Relearn Sensors After Tire Rotation 18

Internal Sensors 18

Wrong Vehicle Chosen 18

No Power 18

Reset Repeater 18

Reset LCD Handheld Display 18

Notes 19

Introduction

Tire Linc® is a tire pressure and temperature monitoring system (TPMS). The TPMS display issues an alert

when a unit's pressure or temperature falls out of the programmable range. The system is operated by a

handheld display, and a power cord and stand are included with the kit (Fig.1).

NOTE: If utilizing the LCD handheld display with the repeater, then neither the OneControl app nor the Tire

Linc Alert Indicator can be used with the repeater.

NOTE: Images used in this document are for reference only when assembling, installing and/or operating

this product. Actual appearance of provided and/or purchased parts and assemblies may differ.

For information on the assembly or individual components of this product, please visit:

https://support.lci1.com/tire-linc.

Do not use tire sealant with internal sensors. This will damage the sensor and void the warranty.

LCI Tire Linc User Manual

Questions and Answers: