Leakomatic Pro1 - System Settings Categories; General Settings; Security Settings; Network Settings

11
Network >
Input handling >
Valve handling >
Output handling >
> Startup mode
> Sound alert
> Silent time
> Sleep length
> Language
> Set clock
> Timezone
> Restart device
> Factory reset
> FT alarms
> FT time away
> FT time home
> FT alarm delay
> QT alarms
> QT index limit
> QT alarm delay
> TT alarms
> TT count
> TT length
> TT alarm delay
> VTh Status
> VTh Time period
> VTh Volume
> VTh Alarm delay
> VTh Valve action
> VTm Status
> VTm Time period
> VTm Volume
> VTm Alarm delay
> VTm Valve action
> PIN enabled
> Change PIN
> WiFi
> WiFi network
> Cloud PIN
> Conditioning
> Time of day
> Valve control
> On FT alarms
> On QT alarms
> On TT alarms
> Sensor diag.
> AUX1 in
> AUX1 active
> AUX1 pulse unit
> AUX1 pulse size
> AUX1 calibration
> AUX2 in
> AUX2 active
> AUX2 pulse unit
> AUX2 pulse size
> AUX2 calibration
> Analog input*
> Sensor min
> Sensor max
> Event high
> Threshold high
> Event low
> Threshold low
> Hysteresis
> AUX out active
> AUX out when
> Flow test control
> Quick test control
> Tight. test control
> Volume test control
> VTh Status
> VTh Time period
> VTh Volume
> VTh Alarm delay
> VTh Valve action
> VTm Status
> VTm Time period
> VTm Volume
> VTm Alarm delay
> VTm Valve action
HOME HH:MM
OK 0.37
FLOW TEST ALRM
00:33:29
AUX1: LOW
AUX2: 12345
VTH M2: 500 L
VTM M2: 10 L
EVENTS >
CLOUD ONLINE
192.168.1.121
ANALOG INPUT:
DISABLED
SETTINGS >
TIME 23:59
EET 2015–10–01
TIGHTN. TST OK
24h MAX=XX
SENSOR: 12345678
VALVE: OPEN
VTH M1: 100 L
VTM M1: 50 L
QUICK TEST WARN
1.37 (1.00)
AUX1 OUT: OPEN
STATUS >
SSID: MyWiFi Net
RSSI: –74dBm
INSTALLATION >
Pro1 LOM 302/B
V1.4.0 76d 11 h
TIGHTN. TST CLR
17/11 22 :47 WARN
GENERAL >
FLOW TEST >
QUICK TEST >
TIGHTNESS TEST >
VOLUME TEST M1
VOLUME TEST M2
QUICK TEST
23/9 05:03 WARN
AUX2 IN
23/9 05:03 WARN
VT DIAG M1 CLR
29/9 13:26 WARN
ANALOG HIGH CLR
23/9 05:03
VT HOUR M2 CLR
23/8 17:05 WARN
ANALOG LOW CLR
23/9 05:03
VT MINUTE M2 CLR
25/3 21:05 WARN
ANALOG DIAG CLR
23/9 05:03
VT DIAG M2
--/-- --:--
REMOTE ALARM CLR
--/-- --:--
FLOW TEST
1/10 18:03 ALRM
AUX1 IN
23/9 05:03 WARN
VT MINUTE M1 CLR
7/8 12:07 ALRM
SENSOR DIAG CLR
23/9 05:03
VT HOUR M1 CLR
6/8 11:05 ALRM
Security >
Only visible if AUX1 In is
set to water meter
Only visible if AUX2 In is
set to water meter
Only visible if Analog Input
is set to pressure or temp sensor
* From rev. LOM-302/B
MENU STRUCTURE: