8
Alarm Warning Description
Flow test Flow has continued longer than the set maximum time.
See further information in Flow test.
Tightness
test
The tightness test detects possible hidden leaks.
See further information in Tightness test.
Quick test The index limit of the Quick test has been surpassed.
See further information in Quick test.
Volume Test
More water than permitted has flowed during the time set
for max. flow volume. See info on Volume Test.
AUX1 IN AUX1 input is activated.
AUX2 IN AUX2 input is activated.
Sensor There has not been any pulse or signal registered on the port
during the last seven days.
FLOW INDICATOR
The blue LED light on the control unit is the flow indicator. It lights
up briefly during the pulse indication and stays lit up during flow
indication. The flow indicator has a 10 second delay during which the
device analyses and determines the flow type.
MENU
Navigate the menu with arrows. Up/down arrows allow you to
browse different menus, and you access different sub-menus with
left/right arrows. Press up/down buttons to change the parameter
values and then the right arrow to save settings or the left arrow to
exit without saving.
To Next Page
Loading...
