7
CONTROL UNIT
OPERATION INSTRUCTIONS
Leakomatic has three modes of operation. Press the Mode button to
select a mode. Press briefly to switch between Home and Away mode. Keep
the button pressed longer to activate the Pause mode. The selected mode
shows in the mode indicator and the on the screen.
Setting Description Indicator
Home
Allows longer flow time; use when you are at home. Light on
Away
Allows minimal water flow. Recommended to use
when you are away from home for longer periods
of time. For maximum protection, you can use this
mode every time the house is left unattended.
Flashes quickly
Pause
Temporarily de-activates the setting that shuts
off water and sounds an alarm. Activate this mode
when you need an infinite amount of water, i.e. for
watering the lawn.
Flashes slowly
When you activate Pause mode you can determine how long the mode stays on before
the system returns to its normal function. You can deactivate Pause mode any time by
pressing the mode button which restores the device to its previous mode of operation.
ALARMS
The alarm light flashes during the warning and stays on during the alarm.
Press the Clear button briefly to silence the warning and alarm sounds. Keep
the Clear button pressed to clear the alarm.
The system shuts off water only in case of an alarm. Silence the alarm by briefly
pressing the Clear button and find the cause of the alarm. The water will start to flow
again only after the alarm has been cleared.
The device warns before sounding an alarm if a delay has been set. The alarm must be
manually cleared whereas warnings can be automatically cleared through the system
after the cause of the alarm has passed.
You can set a time frame when the system stays silent to guarantee uninterrupted
sleep. Alternatively, you can permanently disable the alarm sound or only allow sounds
during a warning/alarm.
To Next Page
Loading...
