LC Easyjet-16W/18S User Manual V13GZ.1
5
1. Foreword
Thanks for purchasing this printer of Zhengzhou LECAI Science And Technology Co., Ltd. We write
this specification for your convenience of using this machine. Installed steps and system operation are
mentioned here. In order to maximize the effect of this specification, you may be under the directory to
search related topic. Please place this specification that is easy to get.
Operators must seriously- read and keep-well this specification for your reference. Inkjet printer is a
Mechanical and Electrical Equipment, combining the fine machine construction and complicated electronic
circuit. Print heads in the machines should be taken good care of, avoiding from collision or shaking, and
dust in the air. The CPU and EMS memory such sensitive electronic parts can not resist from the static, so
they should avoid osculating the dank air. Thus, the operation and basic maintenance are factors decided
whether the printer can work well and permanent use. If the maintenance and operation are not noticed, the
printer always appears so many malfunctions, like seeping inks, can’t spray inks or something else. In this
way, it wastes the valuable ink and print media, Therefore, we should intensify the safeguard and
maintenance of the printer, besides, we need to familiar with every kind diagnose and treatment of the
diseases, in case of the hurry-scurry situation at the moment of truth.
1.1 Power Safety
A. Power: One-way exchange of 50Hz 220V AC（±10%）/ 60Hz 110V AC（±10%）.
B. Only use the power which can identify the printer's label. According to different countries and regions
may use 110V AC or 220V AC power.
C. Voltage instability regions please use UPS, that would be better for the printer.
D. All the devices connected to a properly grounded socket, in case, socket used on and off with those who
frequently switch between devices (such as photocopiers, air-conditioning systems) in the same loop.
E. Avoid using the wall switch or Automatic timer-controlled socket.
F. Apart your computer system from the potential sources of electromagnetic, such as speaker or landless
phones.
G. Do not use damaged or broken power cable.
H. If you use the attached power cable, make sure the power cable into the additional equipment the total
amperage should not exceed the rated amperage of the power addition, make sure all the equipment
To Next Page
Loading...
Need help?
General
