LECAI Science And Technology LC Easyjet-16W User Manual

LC Easyjet-16W/18S User Manual V13GZ.1
60
7. Raster
8. Ink
6. Reduce carriage speed.
7. Clean the raster.
8. Please use LECAI original Ink.
Print pass line
1.Calibration
2.Feeding system
3.Printhead status
4.X motor belt
1. Step calibration.
2. Feeding unit too tight, media can’t feeding automatic.
3. Clean the print head.
4. Adjust the X motor belt tensioning.
5. Open “Eclosion” function.
Print size not
correct
1.Calibration
2.Image size
3.Maintop software
4.Raster
5.X motor belt
6.Feeding system
1. Calibration the printer.
2. Check the Image size.
3. Re-install the Maintop software.
4. Clean the Raster.
5. Adjust the X motor belt tensioning.
6. Feeding unit too tight, media can’t feeding automatic.
Print ink-break
1.Print head
2.Working Environment
3.Voltage
4.Ink tube
5.ink Cartridge
6.Damper
7.Ink
8.Carriage board
1. Clean Print head.
2.Temperature：18°- 35°Humidity：35RH - 65RH.
3. Use UPS.
4. Check whether the ink tube air leakage or folded.
5. Check whether the air hole of ink cartridge blocking.
6. Suck the ink to the damper or change the damper.
7. Please use LECAI original Ink.
8. Change the Carriage board.
Printing but
print nothing
(not ink come
out)
1.Printhead cable
2.Carriage board
3.Printhead
1. Make sure the printhead cable correct connection
2. Change the printhead cable.
3. Change the carriage board.
4. Change the printhead.
Heating but no
response
1.Heater switch
2.Heater cable
3. Temperature controller
4. Heater
1. Check whether the heater switch damage.
2. Check whether the heater cable looser.
3. Increase temperature from temperature controller.
4. Change the temperature controller.
5. Change the heater.
Media skew
during printing
1. Feeding unit
2. Media
3. Pinch roller
1. Check whether the feeding unit is smoothly.
2. Loading the media again and set the correct position.
3. Check whether all the pinch roller grip the media.
 Zhengzhou LECAI Science And Technology Co., Ltd.
 Hotline：400-717-6789
 Tel： 86-371-67896626
 Fax：86-371-67897386
 E-mail：lecai@locor.com.cn
 Website：http://www.locor.com.cn/
 Factory Address：B9, 2 Nanshan Industrial Zone, Yantian, Fenggang, Dongguan, Guangdong, China
Address：B1101, Torch Building, No. 8, Guohuai Street, High-Tech Zone, Zhengzhou, Henan, China

LECAI Science And Technology LC Easyjet-16W Specifications

General

Brand	LECAI Science And Technology
Model	LC Easyjet-16W
Category	Printer
Language	English