MyWay+ User Manual p.13
9.5 Upper Support Unit | Detaching the Upper Support Unit from the Frame
Warning – do not attempt to detach the upper support
unit whilst the user is in the product. Ensure the user has
been transferred out of the product rst.
• Ensure overall height is
adjusted to its highest
position - see section 9.12
‘Overall Height Adjustment’.
• Ensure brakes have been
applied to all castors - see
section 9.6 ‘Applying/
releasing brakes’ for
instructions.
• If the pulley straps are
attached to the clips at
the bottom of the frame,
ensure the pulley straps
are released before
attempting to detach
the upper support.
• Place one hand on the unit,
underneath the grey lever
pull out and hold onto the
grey handle with the other
hand
.
• Lift the upper support
unit out of the frame’s
receiver slot.
When approaching MyWay+ sizing limits, a risk
assessment should be carried out to assess the
suitability of the particular MyWay+ frame size
for a user.
Size 1 is suitable for users up to 25kg and a shoulder
height of 870mm; size 2 is suitable for users up to 50kg
and a shoulder height of 1190mm; size 3 is suitable for
users up to 80kg and a shoulder height of 1490mm.
The product is suitable for use
indoors and outdoors on smooth,
level surfaces. Do not use the
product on uneven or rough
terrain. Potential environments
for use should be risk assessed
to ensure user safety.
Maximum
Weight of
and shoulder
height of
accommodated
by the Size 3
1490MM
MYWAY+ IS
SUITABLE FOR
USERS UP TO:
To Next Page
Loading...
