p.27 MyWay+ User Manual
• Position the user in lying
or perched sitting with
support on the edge of
a plinth.
• Attach the hoist straps to
the harness using the two
hoisting points situated on
both the front and back of
the harness- see section
11.6 ‘Hoisting Straps’
for instructions.
• Connect the straps to
the hoist.
• The rst carer operates the
hoist and guides the user
into a suitable position
for attaching the harness
to the frame. The user
should be supported by
the hoist until this
position is secured.
• The second carer attaches
the harness to the
frame- see section 10.5
‘Attaching harness to the
frame’
for instructions.
• Remove the hoisting
straps from the harness -
see section 10.6 ‘Hoisting
Straps’ for instructions.
Hoisting Transfer to the Frame:
Hoist Points Hoist Points
To Next Page
Loading...
