MyWay+ User Manual p.28
• Attach the hoisting straps
to the harness- see section
11.6 ‘Hoisting Straps’ for
instructions- and connect
the straps to the hoist.
• Raise the hoist until the
hoisting straps are taut.
• Release the grey shoulder
strap buckles on the
harness.
• Release the red
and
white buckles
on the
harness- this disconnects
the harness from the
harness connection point
straps on the frame.
• Transfer the user to their
chair or plinth.
• Remove the hoisting straps
from the harness - see
section 11.6 ‘Hoisting
Straps’ for instructions.
For instructions on how to
remove the harness from
the user, see section 10.7
‘Removing the harness’.
Hoisting Transfer out of the Frame:
Warning – The harness complies with LOLER (lifting operations
and lifting equipment regulations). It is the caregiver’s
responsibility to adhere to these regulations when hoisting.
Ensure all relevant straps are attached/secured in the correct
positions before beginning to hoist.
To Next Page
Loading...
