LeCroy Waverunner2 LT262 Series User Manual

Rev. D Performance Verification 5-27
!
Increase the generator frequency until
sdev(1)
=
140 mV.
(typically 200 MHz)
!
Press
Clear Sweeps
!
When
sdev(1)
=
140 mV,
record Freq(1) in Table 9.
!
Repeat the 20 MHz and 200 MHz Bandwidth limiter tests for the other channels,
substituting channel controls and input connector.
!
Recall
xxxP025.PNL
for Channel 2
, xxxP026.PNL
for Channel3
xxxP027.PNL
for Channel 4, or configure the DSO as shown in 5.9.1
Procedure and make the necessary changes.
!
Record the test results in Table 9, and compare the results to the limits.

LeCroy Waverunner2 LT262 Series Specifications

General

Brand	LeCroy
Model	Waverunner2 LT262 Series
Category	Test Equipment
Language	English