lefant M310 - Using the Product

12
3. Using the product / 3.1 How to use buttons
Hold for 3 seconds:
Turn on
Fast press:
Start/Pause (planned cleaning)
Fast press twice:
Auto-recharge
Hold for 6 seconds:
Enter network pairing mode
Indicator Meaning
Indicator statusRobot status
Cleaning
Pause/standby
Charging
Low battery-automatic
return and charge
Cleaning complete-automatic
return and charge
Enter network pairing mode
Distribution Network Success
Blue light on
Blue light on
Purple/Blue Breathing
Red light on
Purple light on
Blue light flash
Error
Red light on/flash
Blue light on
(a long "beep" indicates power off)
(Networking operation: Press and hold for 6 seconds and
release when you hear two beeps, the light will blink and
the robot will enter the networking mode, please open
the App for networking and pairing).
Hold for 12 seconds:
Turn off (a long "beep" indicates power off)