lefant T8 Series - User Manual

Questions and Answers

T
Trevor GuzmanAug 14, 2025
How to fix lefant T8 that cannot connect to WIFI?
- S
  Susan JonesAug 14, 2025
  If your Lefant Vacuum Cleaner can't connect to WIFI, it might be due to a few reasons. First, ensure that you've entered the correct WIFI name and password. Second, verify that the robot is in network pairing mode. Also, be aware that the robot isn't compatible with 5G WiFi signals, so please connect to a 2.4G WiFi signal. Finally, make sure you have downloaded the correct app by scanning the QR code in the user manual or searching “Lefant life” on Google Play or the App Store.
E
Edgar AdamsAug 18, 2025
Why is my lefant T8 Vacuum Cleaner so noisy?
- M
  Michelle GibbsAug 18, 2025
  Your Lefant Vacuum Cleaner might be noisy due to a couple of reasons. One potential cause is that the side brush, rolling brush, or dustbin are entangled or blocked. Regularly clean and maintain the brush, roller brush, dustbin, and filters. Another reason could be that the robot is in MAX suction power mode. Try changing the suction power mode to Medium or Low.
L
Luke BarberAug 20, 2025
What to do if lefant T8 remote control failure?
- P
  Philip MullinsAug 21, 2025
  If you're experiencing remote control failure with your Lefant Vacuum Cleaner, here are a few things to check: * First, the batteries in the remote control may need to be replaced. Replace the battery with a new one and install it properly. * Second, ensure that the robot is powered ON and fully charged. * Third, the infrared signal may be blocked because the Infrared Emitter on the Remote Control or robot’s Infrared Receiver on robot is dirty. Use a dry cloth or the Multi-Function Cleaning Tool to wipe the Infrared Emitter on Remote Control and the Infrared Receiver on the robot. * Finally, avoid using the Remote Control near other equipment using infrared signals, as this can interfere with the signal to the robot.
O
ocohenAug 25, 2025
What to do if Lefant Vacuum Cleaner has not made a connection with the Charging Dock?
- H
  hortonchelseyAug 25, 2025
  If your Lefant Vacuum Cleaner isn't connecting to the Charging Dock, make sure the Charging Dock is plugged in and ensure the robot is not powered ON.
W
woodwilliamAug 27, 2025
What to do if Time Scheduling function is cancelled on Lefant Vacuum Cleaner?
- J
  Jon CollinsAug 27, 2025
  If the Time Scheduling function is cancelled on your Lefant Vacuum Cleaner, it might be because the robot is powered OFF. Power on the robot and make the schedule using the remote control over again.
E
Emily GarrettAug 31, 2025
What to do if Lefant Vacuum Cleaner is entangled or obstructed by scattered wires?
- L
  Leroy LongAug 31, 2025
  If your Lefant Vacuum Cleaner gets entangled or obstructed, it will try various ways to get itself out of trouble. If it is unsuccessful, manually remove the obstacles and restart it.
K
Kathleen MartinezSep 3, 2025
Why Side Brush is stuck on Lefant Vacuum Cleaner?
- J
  James HollandSep 3, 2025
  If the Side Brush on your Lefant Vacuum Cleaner is stuck or its rotation speed decreases, it's likely due to debris tangled around it. Remove the debris. If the Side Brush still rotates slowly, contact Customer Service.
M
Mike DuranSep 6, 2025
Why Roller Brush is stuck on lefant T8 Vacuum Cleaner?
- S
  Shelby MillerSep 6, 2025
  If the Roller Brush on your Lefant Vacuum Cleaner is stuck or the rotation speed decreases, it's probably because of debris tangled around it. Remove the debris with the provided Multi-Function Cleaning Tool. If the Roller Brush still rotates slowly, contact Customer Service.
G
ggrantSep 10, 2025
What to do if lefant T8’s components are tangled with debris?
- E
  Erica DavisSep 10, 2025
  If your Lefant Vacuum Cleaner’s components are tangled with debris, power OFF the robot, clean the Dust Bin, and invert the robot. Clean the Side Brushes and the Roller Brush as described in section 4.