LeFun C2? C6 - Wi-Fi Connection Setup via Ethernet Cable

7
Figure 13 Figure 14
2.3. Wi-Fi Connection Setup through Ethernet Cable
If your router is not compatible with “Wi-Fi Connection mode”, this is an alternative
mode for Wi-Fi connection setup.
1. Follow Step 1- Step 5 in Wi-Fi Connection Mode Setup and then click “Ethernet
Connection” icon to start the Wi-Fi Connection Setup through Ethernet Cable
(Figure7).
2. Use a RJ45 network cable to connect the camera with your router, wait for 60
seconds until it automatically detects the device and bring you to the next step.
Figure 7 Figure 15