Legend LE2833 - PC and TV Signal Input

12
System Connections
Connecting to a PC
The unit can be connected to a PC via the VGA cable and PC audio cable.
1. Connect one end o
f
the VGA cable
to the VGA jac
k
on the jac
k
panel o
f
the unit and the other end to the
PC VGA output.
2. Connect one end o
f
the audio
cables to the PC IN
j
ac
k
on the
j
ac
k
p
anel o
f
the unit and the other end
to the PC audio out
p
ut
j
ack.
3. Set t he PC video resolution to match that o
f
the television (Native 1920 x
1080@60Hz).
4. After connection, turn on the
p
ower o
f
the unit and the PC.
5. Press INPUT then direction buttons to select VGA mode, and then
p
ress the
ENTER button to confirm.
Connecting to TV-Signal Input
Connect the TV si
g
nal cable (the antenna
cable, for exam
p
le) to the RF in
p
ut Jac
k
on
the bac
k
o
f
the unit so that
y
ou can
receive television
p
ro
g
rams.
1. Connect TV si
g
nal in
p
ut source from
the aerial to the RF in
p
ut
j
ac
k
on the
rear
p
anel o
f
the unit.
2. After connection, turn on the
p
ower o
f
the unit.
3. Then
p
ress the INPUT button and the direction buttons to select TV mode,
p
ress the ENTER button to confirm and conduct
p
ro
g
ram selection.