the TV On and Off
Connect the
ter to wall AC Outlet. A front mounted indicator li
ht
will be illuminated red indicatin
ower.
Press the POWER button on the remote control or the TV set. The TV’s indicator
li
the TV is turned O N.
Press the POWER button a
ain to turn the TV off. A front mounted indicator
li
ht will be illuminated red indicatin
the TV is off.
Source selecting
The unit incor
ut sources which can be
selected via the INPUT button on the television or remote. Press
the INPUT button to enter Input menu, as shown ri
ht.
Use the ▲▼ direction buttons and the ENTER button
On the input menu, press the ▲▼ direction button to select
the desired input source. After several seconds, the TV will
enter the selected source.
Or after
ou selected the desired source press the ENTER button to enter the
selected source immediatel
.
Use the INPUT button and the ENTER button
On the in
to select the desired
input source. After several seconds, the TV will enter the selected source.
Or after
ou selected the desired source
ress the ENTER button to enter the
selected source immediatel
.
Channel Selection
1. Usin
▼ button
2. You have also quick access to the different TV channels b
the numeric
buttons.
3. Usin
LAST button on the remote control to view the last channel
.
The First Time Installation
The first time
ou turn on the T V or after
inal
status, the Setup Wizard will start automaticall
. Follow the prompts on the screen
to set the Menu Lan
stem and the Auto Scan, then press
ENTER button and the channel tunin
rams will be saved into the channel list.
To Next Page
Loading...
Need help?
General
