The EV3 Brick is the control center for bringing your robots to life.
Using the Display and the Brick Buttons, the EV3 Brick Interface
contains four basic screens that give you access to an amazing array
of functions unique to the EV3 Brick. It can be something as simple
as starting and stopping a program, or something as complicated
as writing the program itself.
Run Recent
This screen will be blank until you begin to download and run
programs. The most recently run programs will be displayed on this
screen. The program at the top of the list that is selected by default
is the latest program run.
File Navigation
This screen is where you will access and manage all the files on
your EV3 Brick, including files stored on an SD card.
Files are organized in Project folders, which, in addition to the actual
program files, also contain sounds and images used in each project.
In the File Navigator, files can be moved or deleted. Programs
created using the Brick Program app are stored separately in
theBrkProg_SAVE folder.
EV3 Brick Interface
Run Recent screen
File Navigation screen
Open folder in File Navigation
To Next Page
Loading...
Need help?
General