LEGO MindStorms NXT User Manual

43
1 2
Using Bluetooth
Technology
Make sure that your NXT is connected to the NXT to which you
want to send the program (see page 42, Connecting your NXT
to another NXT). Select the My Files [My Files] submenu in the
NXT display and Select the program you want to send.
Select Send [Send].
Select the connected devices to which you want the program
sent (Lines 1, 2 or 3).
Your NXT then sends the fi le.
Connecting to more than one NXT
You can connect three NXT bricks or other Bluetooth
devices to your NXT at the same time. However, you can
only communicate with one device at a time.
Sending files from NXT to NXT
It’s easy to send programs from your NXT to another NXT:
Connecting your NXT to a mobile phone
If you have a mobile phone with Bluetooth capability, you
can use it with LEGO
®
MINDSTORMS
®
Education NXT.
Go to
www.MINDSTORMSeducation.com to download the
MINDSTORMS Bluetooth connection program for your mobile
phone. On the website, you can also fi nd more information on
how to connect the NXT to your mobile phone.

LEGO MindStorms NXT Specifications

General

Processor	32-bit ARM7 microcontroller
Clock Speed	48 MHz
Memory	256 KB Flash, 64 KB RAM
Display	100x64 pixel LCD
Power	6 AA batteries or rechargeable battery pack
Sensors	Touch, Light, Sound, Ultrasonic
Motors	3 Interactive Servo Motors
Connectivity	Bluetooth, USB
Programming	NXT-G
Input Ports	4 sensor ports
Output Ports	3 motor ports