LEGRAND 10’’ - Page 12

12/15
CONTENTS
10’’ PDUs
19’’ PDUs
Zero-U PDUs
Data sheet: S000093176EN-04 Updated: 29/03/2018 Created: 25/10/2016
Cat. Nos: 6 468 00/01/05/06/07/09/10/11/12/13/14/15/18/1
9/20/21/22/23/24/30/31/32/33/35/36/40/41/42/43/44/
45/50/51/52/53/54/56/57/59/60/61/65/70/75/90/92/94/
95/97/98/99
5. INSTALLATION
5.1 TERMINATION
Depending on the configuration, the PDUs can be connected in different ways.
1) Supplied with power cord
See section 2 "Equipment and performance" to see which standard catalogue products have an integrated cord.
2) Terminal block connection
Some products are supplied without a cable; they are designed to be wired on a terminal block.
See section 2 "Equipment and performance" to see which standard catalogue products have an integrated terminal block.
Example of terminal block connection for a Zero-U PDU with rotative cable entry
L2
L3
N
B
A
L2
L3
N
L2
L3
C
D
L2
L3
N
L2
L3
N
B
A
Cable ø7 min.
Cable ø15 max.
Cable ø13 min.
Cable ø20 max.
10 mm
120 mm
5G 2.5 mm
2
/5G 4 mm
2
A
10 mm
120 mm
3G 2.5 mm
2
/3G 6 mm
2
B
A
C
B
A
10
mm