LEGRAND 845 26 - Scenario Learning Procedure; Modifying an Existing Scenario; Clearing Scenarios

11
Clearing a scenario
Modification of a scenario
Learn scenario
To add a number of products
to the scenario, repeat
operations  and 
for each actor.

Press LEARN

Press the command key
that is to control
the scenario
Press the command key
that is to be associated
with the leader
The indicator lamps of all the products go off.
The scenario is recorded.
Step 1: Start the learn phase (on the LEADER)
Step 2: Add an actor to the scenario (on the ACTOR)
Step 3: Record the scenario (on the LEADER)

Press LEARN

Press LEARN

 
 
Step 2 : Modify the state of an actor in the scenario (on the ACTOR)
Step 3 : Record the scenario (on the LEADER)

6
or
To remove the product from
the scenario, go to step 3
Press LEARN Press LEARN Press the command key
that is to be associated
Press LEARN Press the command key
that controls the scenario
The indicator lamps of all the products
in the scenario blink.
Step 1: Open the scenario (on the LEADER)
The indicator lamps of all the products go off.
The scenario is recorded.
Press LEARN
Key
The indicator lamp
goes off
The indicator lamp
blinks slowly
The indicator lamp
blinks quickly
The indicator lamp
flashes

Press LEARN

Press the command
key and hold it
down for 10 s
5 s
The scenario is cleared
Clear all the scenarios linked with the command key (on the LEADER)
Clear all the scenarios linked to this product (on the LEADER)

Press LEARN

Press LEARN
and hold down
for 10 s
5 s
Return the product
to factory configuration