10
Description
Operation
The individual shutter controller:
- Can simultaneously control a set of products (actors) that have been associated with it during the learn phase
(1)
.
It is then the Leader of the scenario
(2)
.
- Can be controlled by other Leader products. It is then an Actor in the scenario.
As Leader:
The individual shutter controller can control the following using its Up - Stop - Down keys:
- The opening that is connected to its terminals
- The openings that are connected to the terminals of the other products associated with it (the actors).
Note: It is only necessary to l
earn the Up key.The Stop and Down keys are learned automatically.
As Actor:
The individual shutter controller can participate in 16 different scenarios, locally executing the Up - Stop - Down
commands from the other Leaders.
It has an interface for the infrared signals that is used to control its scenarios and/or other products in the installation.
(1) Learn phase:Operation to associate products so that they can
be controlled simultaneously from a central point.
This association is carried out by applying the learn scenario procedure on page 11.
(2) Scenario: Corresponds to the set of products (actors) that are associated with a command key.
To Next Page
Loading...
